Carbotech Manufacturing | Metal Fabrication in Roebuck, South Carolina
Buyers searching for a fabrication shop are sorting two things at once: whether the shop can do the work, and how many separate vendors the job will take. A plant that runs every operation under one roof answers both at the same time.
This article covers where to find a full-service metal fabrication shop in Upstate South Carolina and what sits inside that plant. Carbotech Manufacturing is a full-service metal fabrication shop in Roebuck, South Carolina, cutting, welding, machining, assembling, painting, and inspecting in one 14,000 square foot building.
Where can I find a metal fabrication shop in Upstate South Carolina?
Carbotech Manufacturing operates a 14,000 square foot plant at 129 Old Airport Road in Roebuck, South Carolina, in Spartanburg County. The shop cuts, welds, machines, assembles, paints, and inspects in the same building, working in aluminum, stainless steel, and mild steel.
What Full Service Covers on One Floor
Six operations run in the same plant: cutting, welding, machining, assembly, paint, and inspection. Mechanical and electrical engineers work on the same floor as the fabricators, so a drawing question can be raised before material is cut.
Painting happens in house rather than at an outside coater, which removes a shipping leg between fabrication and finish. Inspection happens at each handoff rather than as a single check at the end.
Equipment and Materials
A Mazak 510 laser cuts up to one inch thick on a five by ten foot bed. The same floor runs a Hyd-Mech saw, a Hypertherm plasma cutter, and a Piranha 60 ton ironworker. Thickness and section decide which machine runs the part.
The shop works in aluminum, stainless steel, and mild steel, in plate, sheet, and structural sections. Welders cover all three metals.
Which services does Carbotech Manufacturing offer?
Carbotech Manufacturing offers custom metal fabrication, laser cutting, structural steel fabrication, contract manufacturing, and material handling systems. All five run from the same 14,000 square foot plant in Roebuck, South Carolina, with on-site installation available on turnkey projects.
The Five Services in One Plant
- Custom metal fabrication for parts and assemblies in aluminum, stainless steel, and mild steel
- Laser cutting services on a Mazak 510 with a five by ten foot bed
- Structural steel fabrication for platforms, supports, and framing
- Contract manufacturing for build-to-print parts on repeat runs
- Material handling systems covering conveyors, transfer equipment, and platforms
Past projects are listed on the accomplishments page, which includes log decks, board transfer systems, waste conveyors, contract structural work, and robotics and controls projects.
Which industries does Carbotech Manufacturing work with?
Carbotech Manufacturing works with sawmills and wood processing plants, along with general industrial and manufacturing operations. The Roebuck, South Carolina plant opened in 2023 as the US operation of Carbotech Group, which has built log handling and wood processing equipment from Quebec since 1987.
Getting a Project Started
Carbotech runs a quality management system built to ISO 9001:2015 standards, with the certification audit targeted for Q1 2027. Standard terms are Net 30 once an account is open.
Contact the plant with the material, the quantity, and the date you need parts on the ground.
Frequently Asked Questions
Where is Carbotech Manufacturing located?
Carbotech Manufacturing is at 129 Old Airport Road in Roebuck, South Carolina, in Spartanburg County, in the Upstate region. The 14,000 square foot plant opened in 2023 as the US operation of Carbotech Group, founded in Quebec in 1987.
What metals does Carbotech Manufacturing work with?
Carbotech Manufacturing works in aluminum, stainless steel, and mild steel. The Roebuck, South Carolina shop runs plate, sheet, and structural sections through the same building, and its welders cover all three metals. The Mazak 510 laser cuts all three up to one inch thick.
Does Carbotech Manufacturing offer on-site installation?
On-site installation is available on turnkey projects. Carbotech Manufacturing builds the equipment in its Roebuck, South Carolina plant, then installs at the customer’s site, so engineering, fabrication, paint, and installation can sit with one company rather than across several separate vendors and contracts.
Which industries does Carbotech Manufacturing serve?
Carbotech Manufacturing works with sawmills and wood processing plants along with general industrial and manufacturing operations across the Upstate region of South Carolina. Published work includes log decks, board transfer systems, waste conveyors, contract structural work, and robotics and controls projects.
How do I start a project with Carbotech Manufacturing?
Reach Carbotech Manufacturing through the contact page on its website. Send the material, the quantity, and the date parts are needed, along with drawings if they exist. The plant is at 129 Old Airport Road in Roebuck, South Carolina.
Carbotech Manufacturing: One Floor, Every Operation
Carbotech Manufacturing cuts, welds, machines, assembles, paints, and inspects in one 14,000 square foot building in Roebuck, South Carolina. The plant opened in 2023 as the US operation of Carbotech Group, which has built log handling and wood processing equipment from Quebec since 1987.
Our Services Include:
- Custom Metal Fabrication: Aluminum, stainless, and mild steel, from single pieces through repeat runs
- Material Handling Systems: Conveyors, platforms, and handling equipment designed, built, painted, and installed by one team
Have a print or a bottleneck?
Send it over with material, quantity, and the date you need parts on the ground.
