Skip to content
Carbotech Manufacturing LLC
Roebuck, SC

Where to Get Metal Laser Cutting in Spartanburg County, SC

Carbotech Manufacturing | Metal Fabrication in Roebuck, South Carolina

Laser cutting is often the first operation on a part and the first thing a buyer shops for. Two questions usually decide the vendor: whether the shop can run the job, and whether it can take the part further than the cut.

This article covers where to get metal laser cutting in Spartanburg County, SC, and what the service includes. Carbotech Manufacturing is a full-service metal fabrication shop in Roebuck, South Carolina, cutting, welding, machining, assembling, painting, and inspecting in one 14,000 square foot building.

Where can I get metal laser cut in Spartanburg County, SC?

Carbotech Manufacturing offers laser cutting at 129 Old Airport Road in Roebuck, South Carolina, which is in Spartanburg County. The shop runs a Mazak 510 laser cutting aluminum, stainless steel, and mild steel, in a plant that also handles welding, machining, assembly, and paint.

What the Shop Runs

The Mazak 510 cuts up to one inch thick on a five by ten foot bed, in aluminum, stainless steel, and mild steel. Each metal behaves differently through the cut, so the alloy and the thickness belong in the request.

Material heavier than the laser holds moves to the Hyd-Mech saw, the Hypertherm plasma cutter, or the Piranha 60 ton ironworker on the same floor. Thickness and section decide the route. For how the two cutting processes compare, see laser cutting vs. plasma cutting.

What does Carbotech’s laser cutting service include?

Carbotech Manufacturing cuts the part, deburrs it, and checks it against the drawing before it leaves the floor. Customers can collect the finished blanks, or the same Roebuck, South Carolina shop can weld, machine, assemble, and paint them into a finished unit.

Blanks, or the Whole Part

Some buyers want cut blanks and nothing else, because the welding happens on their own floor. Others want the finished assembly. Both work, and the difference is worth stating up front so the shop knows where the job ends.

When a job continues past the cut, it moves into custom metal fabrication in the same building, which removes a shipping leg between operations. Ongoing build-to-print production runs through contract manufacturing. Cut parts that feed a conveyor or platform tie into material handling systems and structural steel fabrication.

Can I order laser cut blanks without any further fabrication?

Carbotech Manufacturing cuts parts that customers collect as blanks, with no welding, machining, or paint attached. The shop deburrs the parts and checks them against the drawing first. Say at the request stage where the job ends, so the quote covers the cut alone rather than a finished assembly.

Starting a Laser Cutting Request

Send the drawing file, the material and thickness, the quantity, and the date parts are needed. Quantity matters more than buyers expect, since larger runs get nested across the sheet differently than a single part. For the full list of details behind a fabrication request, see what to send a metal fabricator for a quote.

The laser cutting services page lists materials and capacity. Contact the plant to start a request.

Frequently Asked Questions

Is there a laser cutting shop in Spartanburg County, SC?

Carbotech Manufacturing offers laser cutting at 129 Old Airport Road in Roebuck, South Carolina, which is in Spartanburg County. The 14,000 square foot plant also handles welding, machining, assembly, paint, and inspection in the same building, so a part can leave as a blank or as a finished unit.

Does Carbotech cut parts for customers who do their own welding?

Customers can collect laser cut blanks and take the welding in house. Carbotech Manufacturing deburrs the parts and checks them against the drawing before they leave the Roebuck, South Carolina plant. State at the request stage where the job ends.

What happens to metal too thick for the laser?

Material heavier than the laser holds runs on the Hyd-Mech saw, the Hypertherm plasma cutter, or the Piranha 60 ton ironworker on the same floor in Roebuck, South Carolina. Thickness and section decide which machine takes the part.

Does Carbotech laser cut parts for other manufacturers?

Carbotech Manufacturing cuts parts to customer drawings for industrial and manufacturing operations across the Upstate region of South Carolina. Work ranges from single pieces through repeat runs in aluminum, stainless steel, and mild steel. Send the drawing file, the material, the thickness, and the quantity to start.

Who do I contact for laser cutting in Spartanburg County?

Carbotech Manufacturing takes laser cutting requests through the contact page on its website, for its plant at 129 Old Airport Road in Roebuck, South Carolina. Send the drawing file, the material and thickness, the quantity, and the date parts are needed.

Carbotech Manufacturing: One Floor, Every Operation

Carbotech Manufacturing cuts, welds, machines, assembles, paints, and inspects in one 14,000 square foot building in Roebuck, South Carolina. The plant opened in 2023 as the US operation of Carbotech Group, which has built log handling and wood processing equipment from Quebec since 1987.

Our Services Include:

Have a print or a bottleneck?

Send it over with material, quantity, and the date you need parts on the ground.

Related Articles

Start a project

Bring us a drawing or bring us a bottleneck

Send prints, member sizes, material, quantity and the date you need parts on the ground. You get a schedule back based on real capacity rather than optimism.